Installation of air conditioners from 4.6 to 5.5 kW on a prepared installation

1.00 PDV je uključen u cijenu

Installation of the air conditioner on the prepared installation implies the installed freon installation (copper pipes with insulation) which in diameter
and length corresponds to the air conditioner being installed, as well as the installed support of the outdoor unit in the appropriate positions.

temp up
6,95kW
temp down
6,45kW

50m2
energy
A+ | A++

cards

kartice jednokratno: $400,00 kn

kartice 2-12 eata: 5700 kn/ već od 475,00 kn/mj

kartice 13-24 eata: 6000 kn/ već od 255,00 kn/mj

 

grijanje
hladenje
engrijanja
enhladenja

6,95

6,45

 A +

 A ++

narudba

Podrška korisnicima:

0800/600-100
Pon-Pet:8:00-17:00

narudba

Besplatna dostava:

Za sve narudžbe iznad 1999kn

narudba

Ovlaštena montaža:

Na području cijele Hrvatske

narudba

Povratak robe:

Moguć povrat unutar 14 dana

Dostupnost: dostupno

Kupi s proizvodom:

Instalacije Klime do 3,5KW

Instalacija Klime iznad 3,5KW

Eco Sence

Usporedi

Installation of air conditioners from 4.6 to 5.5 kW on a prepared installation

1.150,00 kn
The price includes VAT (25%)

– installation of indoor and outdoor units
– connecting the device to the installed freon installation
– connection of electricity power supply to the existing electrical installation
– consumables (insulating tape, laces, silicone, plaster and other necessary
consumables for the mentioned installation)
– commissioning, certification of the Warranty Card and training of users on
the use of air conditioners

Description:

The existing preparation of installations for air conditioners includes:
– pre-insulated copper pipes with a connection diameter of 1/4″ and 3/8″
– power supply – el. cable 3×1.5 mm2 (3×2.5 mm2)
– interconnection – el. cable 4×1.5 mm2
– condensate drain from the indoor unit, by free fall into the prepared drain
– a suitable support for the outdoor unit

The existing preparation of installations for air conditioners includes:
– pre-insulated copper pipes with a connection diameter of 1/4″ and 1/2″ or 1/4″ and 3/8″ depending on the model of the indoor unit to be installed
– power supply – el. cable 3×1.5 mm2 (3×2.5 mm2)
– interconnection – el. cable 4×1.5 mm2
– condensate drain from the indoor unit, by free fall into the prepared drain
– a suitable support for the outdoor unit

Installation of the air conditioner on the prepared installation implies the installed freon installation (copper pipes with insulation) which in diameter and length corresponds
to the air conditioner being installed, as well as the installed support of the outdoor unit in the appropriate positions. The installed freon installation must be properly closed
or welded at the ends without the possibility of atmospheric influences. In the event that the installed installations are not completely suitable, they need to be adjusted or
replaced, which increases the cost of installation. The price of installing the air conditioner does not include the use of scaffolding or a car crane or any additional fine or
rough construction, electrical, locksmith or glass work. The above-mentioned prices also do not include a possible supplement with refrigerant R410A or R32, depending on the model
of the device and the length of the installation. The same will be calculated according to the currently valid prices. For correct operation of the inverter air conditioner in
cooling and heating mode, a minimum length of 2 meters is required!

Reviews

There are no reviews yet.

Be the first to review “Installation of air conditioners from 4.6 to 5.5 kW on a prepared installation”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)

UPUTSTVO

Related products

hrHrvatski
× Available on SundayMondayTuesdayWednesdayThursdayFridaySaturday