Heating mats LDTS 160W/m2
ECOFLOOR electric floor heating systems ensure ideal heat distribution and, by decreasing undesirable air circulation, reduce dust levels. These systems offer great comfort, economic and reliable operation, and long lifetime. They preserve free floor space by eliminating the need for various heating elements, radiators and heat distribution systems. The principal advantage of electric floor heating is easy and separate temperature control in individual rooms. Once installed, it is completely maintenance free. ECOFLOOR heating systems are available in two basic variants – heating cable circuits and heating mats. In fact the two systems do not differ from one another very much. In both cases, the heating system consists of a heating cable, either separate or fixed to a supportingfibreglass cloth (heating mat). This modern floor heating system permits easy and effective regulation.
ECOFLOOR HEATING MATS
LDTS heating mat – twin conductor cable with a full protection screen, width 50 cm, halogen free cold lead 1×3 m. LDTS mats are provided with self-adhesive tape for affixing to the floor. 230 V. Packing in cardboard box. The heating mat LDTS – 160 W / m has a heating cable with a power of 160 W / m distributed on pre-glued coils on a fiberglass mesh, ensuring the distance between the powers. The underside of the fiberglass mesh has a self-adhesive coating, which further facilitates the installation of electric underfloor heating. The heating mats are available in different lengths with a width of 50 cm and an additional 3 m cold cable. For the proper functioning of the system and the precise control of the temperature there is a wide range of extremely high quality thermostats, with temperature proble for floor / floor + air.
Basic principles and requirements
The heating mats should be placed at least 5 cm away from peripheral walls
The heating mats should not be placed under fixed furniture and massive objects – kitchen appliances, bathtubs, showers, fixed toilets and others.
Minimum 6 cm thermal insulation and 3 cm screed or specialized reinforced thermal insulation F-BOARD 6/10 mm
The heating cables must not get tangled
While the fiberglass mesh can be cut easily, the heating cable is not cut or shortened
Fixed furniture can be easily bypassed by cutting the fiberglass mesh and securing the cable by hand, surrounding at a distance from the furniture
Unscrew the heating mat according to the distribution
When cutting the support net and reversing the direction, observe a minimum of 3 cm.distance between coils
Surround the fixed furniture, removing the support net and bypassing the objects with the cable
Apply the adhesive layer with a soft spatula
Lay the tiles on small areas (up to 4 sq.m) immediately, and for larger areas 24 hours later
Trenutno nema recenzija