Installation of air conditioners up to 4.5 kW on a prepared installation

Installation of air conditioners up to 4.5 kW on a prepared installation

1.050,00 kn
The price includes VAT (25%)

– installation of indoor and outdoor units
– connecting the device to the installed freon installation
– connection of electricity power supply to the existing electrical installation
– consumables (insulating tape, laces, silicone, plaster and other necessary
consumables for the mentioned installation)
– commissioning, certification of the Warranty Card and training of users on
the use of air conditioners

Description:

The existing preparation of installations for air conditioners includes:
– pre-insulated copper pipes with a connection diameter of 1/4″ and 3/8″
– power supply – el. cable 3×1.5 mm2 (3×2.5 mm2)
– interconnection – el. cable 4×1.5 mm2
– condensate drain from the indoor unit, by free fall into the prepared drain
– a suitable support for the outdoor unit

Installation of the air conditioner on the prepared installation implies the installed freon installation (copper pipes with insulation) which in diameter
and length corresponds to the air conditioner being installed, as well as the installed support of the outdoor unit in the appropriate positions. The installed
freon installation must be properly closed or welded at the ends without the possibility of atmospheric influences.In the event that the installed installations
are not completely suitable, they need to be adjusted or replaced, which increases the cost of installation.The price of installing the air conditioner does not
include the use of scaffolding or a car crane or any additional fine or rough construction, electrical, locksmith or glass work. The above-mentioned prices also
do not include a possible supplement with refrigerant R410A or R32, depending on the model of the device and the length of the installation. The same will be
calculated according to the currently valid prices. For correct operation of the inverter air conditioner in cooling and heating mode, a minimum length of 2
meters is required!