Installation of air conditioners from 5.6 to 8.0 kW on a prepared installation
1.250,00 kn
The price includes VAT (25%)
The existing preparation of installations for air conditioners includes:
– pre-insulated copper pipes with a connection diameter of 1/4″ and 1/2″ or 1/4″ and 5/8″ or 3/8″ and 5/8″ depending on the model of the indoor unit to be installed
– power supply – el. cable 3×2.5 mm2
– interconnection – el. cable 4×1.5 mm2
– condensate drain from the indoor unit, by free fall into the prepared drain
– a suitable support for the outdoor unit
Installation of the air conditioner on the prepared installation implies the installed freon installation (copper pipes with insulation) which in diameter and length corresponds to the air conditioner being installed, as well as the installed support of the outdoor unit in the appropriate positions. The installed freon installation must be properly closed or welded at the ends without the possibility of atmospheric influences. In the event that the installed installations are not completely suitable, they need to be adjusted or replaced, which increases the cost of installation. The price of installing the air conditioner does not include the use of scaffolding or a car crane or any additional fine or rough construction, electrical, locksmith or glass work. The above-mentioned prices also do not include a possible supplement with refrigerant R410A or R32, depending on the model of the device and the length of the installation. The same will be calculated according to the currently valid prices. For correct operation of the inverter air conditioner in cooling and heating mode, a minimum length of 2 meters is required!
Reviews
There are no reviews yet.