CH-HP030LERK (45m3)

Cooper&Hunter CH-HP030LERK ECO ON/OFF pool heat pump 11 Kw

The ECO on/off pool heat pump is one of the most cost-effective ways to efficiently heat a private pool or hot tub. Using free renewable thermal energy from the air, it is 4-5 times more efficient than traditional heating. The Cooper&Hunter pool heat pump will extend the swimming season and give you the highest level of comfort. You can enjoy swimming not only in summer, but also in early spring, late autumn and even winter! The Cooper&Hunter ECO LERK pool heat pump uses ozone-saving R32 refrigerant to significantly reduce carbon emissions. The advanced titanium heat exchanger guarantees a long service life of the heat pump without corrosion. It can be used with all types of water treatment including chlorine, iodine, bromine and salt water. The heat pump of the ECO LERK series is made of durable, reliable and high quality materials. The plastic housing of the pump is resistant to infrared radiation, corrosion and mechanical damage. The heat pump has several built-in safety features which include low water flow protection, high or low pressure protection, overload protection, compressor protection. In the event of a malfunction, the heat pump will perform a self-diagnosis by displaying an error code on the control panel.

Model 11 kW CH-HP030LERK heats the pool with a volume of 45 m3
The heat pump Cooper & Hunter Eco CH-HP030LERK monoblock, is fed from 220-230 V
It is calculated for heating of pools of 45 m3
Operates at -7°С… + 43°С
Heat output 11 kW (BTU 37400 ), consumes 2.16 kW of electricity
COP coefficient – 5.1
R32 freon system runs
Dimensions – 850x320x700 mm

Description of the heat pump Cooper&Hunter Eco CH-HP030LERK:
The monoblock of the American C&H brand is one of the effective ways to heat the pool up to 45 m3
Thanks to the environmentally friendly refrigerant R32, the mechanism reduces carbon emissions into the environment
Thermal energy from the air through the freon enters directly into the water
The car uses 3-5 times more energy than a classic heater
The heat exchanger is made of titanium. This increases the service life of the heat pump, minimizes corrosion processes
The item can be washed with detergents containing chlorine, boron, salt water or iodine
The case material is metal, it withstands exposure to the sun and cold
The pump is equipped with fuses against overload, high or insufficient pressure, etc.

Technical features of the heat pump Cooper & Hunter Eco CH-HP030LERK:
Requires connection to a single-phase network
Type of heat pump – “air-water”, non-inverter
Heat output is 11 kW or BTU 37400
Consumes 2.16 kW of electricity. Coefficient of energy efficiency COP – 5.1. Data are given at air temperature +27 ° С, water temperature +26 ° С, humidity 80%.
At air temperature +24 ° С, water +26 ° С, 70% of humidity produces 9.5 kW, consumes 2 kW
If the window is +15 ° C, water heating parameters +26 ° C, humidity 62%, produces 7.6 kW. Consumes 1.97 kW. COP – 3.85
The car is equipped with a fan that makes 810 rpm