Air to water heat pump Cooper&Hunter CH-HP12MIRM
Heat pump Cooper&Hunter CH-HP12MIRM for heating, cooling and hot water supply (DHW). The unit is equipped with an inverter compressor that maintains the room temperature and water heating with high accuracy. The high performance of the system is significantly increased by the plate heat exchanger and the new R32 freon. Several units can be simultaneously connected to the Uniterm Monotype system: air conditioning, heating radiators, underfloor heating, fan coil, water heater, solar collectors and other heating devices installed in the house. To control the operation of the monoblock, a new modern controller with a touch LCD display and a built-in Wi-Fi module is used. This panel is installed on the wall in a convenient place for the user. With it, you can adjust the temperature, set the timer and select the operating mode.
A special electric heater with an intelligent defrost function will protect the unit from freezing at low outside temperatures, which will significantly extend the life of the device and increase its efficiency. The Cooper&Hunter CH-HP12MIRM heat pump provides water heating from +40 to +80 C. A wide range of outdoor temperatures provides stable heating and water heating at -30 C, and cooling at +10 C. Through the Modus interface, the device can be connected to the BMS Smart Home system. Performance for fan coils or radiators (cold / warm) – 9.5 / 12.0 kW (consumption – 3.11 / 3.48). The new Monoblock C&H appliances offer maximum comfort at home, and are more efficient and environmentally friendly as they use ecological R32 gas as a refrigerant. They are in the power range from 4 to 16kW for 1-phase units and from 10 to 16kW for 3-phase units.
– Two-stage compressor
– Maximum outlet water temperature 60 degrees
– WiFi module as standard
– Multilingual, color touch control panel
– Heating the floor
Trenutno nema recenzija